TAG Player System - Manual (Page 7)

The following buttons are used to enter information into your
TAGGER before, during, and after the game. Each button has two
functions: its Main Function and its Second Function.
2ndF: Hold this button down and quickly press then release any
of the other buttons to perform that button’s Second Function.
Pressing and holding 2ndF for more than 2 seconds at any time
during an actual game mutes or un-mutes the sound effects.
INC: Selects the next item in a list of options, or increases a
number value by 1. Second Function: 2ndF + INC = Increases the
number value by 10.
DEC: Selects the previous item in a list of options, or decreases
a number value by 1. Second Function: 2ndF + DEC = Decreases
the number value by 10.
OK: Enters the selected option or value. Second Function: Starts
or ends the game immediately (only the Host can do this).
CANCEL: Cancels the value or option just selected and backs-
up a step, or dismisses Medic-Mode requests. Second Function:
2ndF + CANCEL = Quits the game and turns the TAGGER off.
DISPLAY: Selects which set of data is to be displayed during
BUTTONS
the game. Second Function: 2ndF + DISPLAY = Adjusts the
LCD contrast.
FUNCTION: Selects the special modes for the Trigger and the
Shield. Holding this button while pulling the Trigger adds Mega-
Tag power to the next tag that you launch. Holding this button
while pulling the Shield initiates Medic Mode.
INDOOR/OUTDOOR SWITCH: Decreases the intensity of
the tag signal for use indoors so that you don’t accidentally
“splatter” your teammates with reflecting tags.
LCD SCREEN
VISUAL CONFIRMATION SYMBOLS
Flashes when you are tagged by another player.
Flashes when you tag another player.
Flashes when your TAGGER is aimed directly at
another player.
Displays when there is an opposing player
nearby.
5