Telular SX4D - Manual (Page 11)

Installation Summary
Step 1. Antenna Setup (page 11)
••
Connect the antenna. Finger-tighten the antenna;
do not overtighten.
Step 2. Connect the Phonecell SX4D to AC
Power (page 12)
••
Connect the DC barrel connector of the power
supply to the rear panel receptacle of the
Phonecell SX4D.
••
Then, connect the wall 6 VDC power supply to AC
power.
NOTE: If your Phonecell SX4D did not come with
a pre-installed mini-SIM (Subscriber Identity
Module) card, you need to perform the SIM Card
Installation and Setup procedure in Step 3. Then,
return to this Step 2.
Step 3. SIM Card Installation & Setup
(pages 13 - 15)
••
If your Phonecell did not come with a pre-installed
mini-SIM card, you need to perform the SIM Card
Installation and SIM PIN Setup.
••
Otherwise, continue to Step 4.
Step 4. Determine Phonecell SX4D Location
(page 16)
••
Determine the desired location for the Phonecell
SX4D.
Step 5. Optional Wall-Mount Installation
(page 17)
••
The Phonecell SX4D may be mounted on a wall.
After you have selected a location and made the
necessary connections, your Phonecell SX4D is
ready for wall-mounting.
The following steps summarize the installation of the Phonecell
SX4D. These steps are explained in detail in the remainder of this
manual.
WARNING!
DO NOT power unit until antenna
is connected, as it may burn out
the radio transmitter. !
SX4D GSM 900 • SX4D GSM 1800 10 U SER M ANUAL
AC
Power