Phonecell operation - continued – Telular SX4D User Manual
Page 26
Phonecell Operation - continued
SX4D GSM 900 • SX4D GSM 1800
25
U
SER
M
ANUAL
Registration - The programming by the user of information to enable subsequent
operation of a service. This action involves input of specific supplementary infor-
mation. For example, when call-forwarding registration is initiated by the user, a
forwarding number must be supplied.
Erasure - The deletion of information stored against a particular service by a pre-
vious registration.
Activation - An action taken by the Desktop Phone user to enable a previously
registered process to run.
Deactivation - An action taken by the Desktop phone user to terminate the
process started at activation.
Depending on the supplementary service, additional parameters may be required
to successfully complete an operation, such as phone number or password.
Some supplementary services have optional parameters, such as Teleservice
and/or Delay settings. Delay is the amount of time to wait before completing per-
formance of a service that has a condition controlling its activity; for example, call
forward on no answer waits an amount of time equal to the "delay" for the phone
to be answered before declaring no answer and forwarding the call.
Teleservice: 10 = All Teleservices, 11 = Speech, 12 = Data, 13 = Fax, 16 = SMS,
19 = All Teleservices except SMS.
Delay: 5-30
seconds
PhoneNo:
Up to 20 digits (0-9)
NOTE: <send> is provided by the hookflash function -see the Hookflash
Function section of this manual (pg 24).
Call Forwarding Unconditional:
Allows a called subscriber to have the network send immediately all incoming calls,
or just those associated with a specific teleservice, addressed to the called sub-
scriber's directory number to another directory number.
Register:
* *
21
*
Ph No
*
Teleservice # <Send>
or
*
21
*
Ph No
*
Teleservice # <Send>
Erase:
# # 21
*
Teleservice # <Send>
Activate:
*
21
*
Teleservice # <Send>
Deactivate: # 21
*
Teleservice # <Send>
Call Forwarding on Mobile Subscriber Busy:
Allows a called subscriber to have the network send immediately all incoming calls,
or just those associated with a specific basic service group, addressed to the called
subscriber's directory number and which meet "subscriber busy" to another direc-
tory number.
Register:
* *
67
*
Ph No
*
Teleservice # <Send>
or
*
67
*
Ph No
*
Teleservice # <Send>
Erase:
# # 67
*
Teleservice # <Send>
Activate:
*
67
*
Teleservice # <Send>
Deactivate: # 67
*
Teleservice # <Send>