Telular SX4D - Manual (Page 21)

SX4D GSM 900 • SX4D GSM 1800 20 U
SER
M
ANUAL
Phonecell SX4D Normal Mode
-
continued
Dialed Digits (Middle Row)
Outgoing Calls
When you make an outgoing call (the
handset is off-hook), the numeric digits
entered are displayed on the LCD Display
- see Figure 14.
• The star (*) key displays "–."
• The hash (#) key displays "
≡≡..
"
NOTE: When the handset is on-hook and
keys are pressed, numeric digits are dis-
played only when the Phonecell SX4D is
in the programming mode.
Dialed digits move from right to left as
they are entered. The dialed digit row is
completely cleared when the handset
goes on-hook in the Normal Mode.
Incoming Calls
When the Phonecell SX4D receives an
incoming call, the Dialed Digits row dis-
plays the incoming call number (Caller ID)
when the on-hook call Alert sounds. The
incoming call number display is turned off
when the call is answered (handset is off-
hook). Caller ID will also be shown for off-
hook call alerts.
NOTE: The incoming call number (Caller
ID) feature requires that Caller ID is pro-
vided by the cellular network. If the ser-
vice is not provided, or the caller ID is
blocked or unknown, the display remains
blank on incoming calls.
Alpha (Bottom Row)
The Alpha Row displays the following
status information:
• Received Signal Strength
• Roam Indicator
• In-Use Indicator
• Cellular Service Indicator
Received Signal Strength
The Received Signal Strength is displayed
by the first 11 characters (from left to right) in
the Alpha Row - see Figure 15. Received
signal strength can be displayed by either a
signal strength bar graph or a direct readout
of the signal strength in dBm.
Phonecell SX4D Operation - continued
Figure 14 – Phonecell SX4D LCD Display
Dialed Digits