Phonecell operation - continued – Telular SX4D User Manual
Page 27
SX4D GSM 900 • SX4D GSM 1800
26
U
SER
M
ANUAL
Phonecell Operation - continued
Call Forwarding on No Reply:
Allows a called subscriber to have the network send all incoming calls, or just those associat-
ed with a specific basic service group, addressed to the called subscriber's directory number
and which meet "no reply" for a specific amount of time to another directory number.
Register:
* *
61
*
Ph No
*
Teleservice
*
Delay # <Send>
Erase:
# # 61
*
Teleservice # <Send>
Activate:
*
61
*
Teleservice # <Send>
Deactivate: # 61
*
Teleservice # <Send>
Call Forwarding on Mobile Subscriber Not Reachable:
Allows a called subscriber to have the network send all incoming calls, or just those
associated with a specific Teleservice group, addressed to the called mobile sub-
scriber's directory number, but which is determined to be "not reachable", to another
directory number.
Register:
* *
62
*
Ph No
*
Teleservice # <Send>
Erase:
# # 62
*
Teleservice # <Send>
Activate:
*
62
*
Teleservice # <Send>
Deactivate: # 62
*
Teleservice # <Send>
Call Forwarding All Call Forwarding:
Allows a called subscriber to have the network send-after the stated delay-all incoming
calls, or just those associated with a specific teleservice, addressed to the called sub-
scriber's directory number to another directory number.
Register:
* *
002
*
Ph No
*
Teleservice
*
Delay #
<Send>
Erase:
# # 002
*
Teleservice # <Send>
Activate:
*
002
*
Teleservice # <Send>
Deactivate: # 002
*
Teleservice # <Send>
Call Forwarding Conditional Call Forwarding:
Register:
* *
004
*
Ph No
*
Teleservice
*
Delay #
<Send>
Erase:
# # 004
*
Teleservice # <Send>
Activate:
*
004
*
Teleservice # <Send>
Deactivate: # 004
*
Teleservice # <Send>
Calling Line Identification Restriction:
If subscribed to in temporary mode, enable the calling party to countermand the
subscribed-to presentation of its line identity to the called party for a specific
call (i.e., the next call) only. (If subscribed to in permanent mode, the network
will prevent presentation of the calling party’s line identity to the calling party for
every outgoing call.)
If subscribed to in temporary mode with default value “presentation restricted,”
the user may suppress CLIR, for the specific call only:
Register:
*
31 # Call Phone Number <Send>
If subscribed to in temporary mode with default value “presentation not
restricted,” the user may invoke CLIR, for the specific call only:
Register:
# 31 # Call Phone Number <Send>