Telular SX4D - Manual (Page 25)

Phonecell Operation - continued
Variable Dial Time (Auto SEND Delay) Option
When you place a call, your Phonecell SX4D automatically sends the phone
number over the cellular network after you dial the last digit. However, to make
sure you have enough time to dial the last digit, a 3-second Auto SEND Delay is
programmed into the unit at the factory. To change the Auto SEND Delay setting,
see the User Programming Commands section of this manual.
Zero Dial Delay for Frequently Called Numbers
A new patented feature enables the Phonecell SX4D to recognize your frequently
called phone numbers and send them immediately – without the 3-second Auto
SEND Delay. The Phonecell SX4D stores a list of up to 50 different numbers in its
memory. This list contains the last 50 numbers that have been called at least
twice successfully.
NOTE: Cycling (turning OFF/ON) the power will erase the current list. A new list
will be started when power is re-applied. To enable or disable this feature, see
the User Programming Commands section of this manual.
Mobile Equipment Personalization (MEP)
The terminal will support all five lock type features of GSM 02.22. Personalization
features check information stored in the terminal which limits the SIMs with which the
terminal will operate. Factory default is all lock types set to be deactivated. Please
contact Telular Corporation if you need more information on this feature.
Three-Digit Dialing
In many countries, three-digit dialing is needed to access emergency services, infor-
mation services, and voicemail. The Phonecell SX4D accepts three-digit dialing.
Using Standard Supplementary Services
Your Phonecell SX4D is compatible with a variety of special services, including:
••
Call Forwarding
••
Call Barring
••
Call Waiting
••
Three-Way Calling
••
Caller ID
••
Voice Mail
and more...
Depending upon your cellular provider, these services may be available on a
subscription basis. However, certain dialing sequences must be entered. Please
consult your service provider for the dialing instructions for your system.
Standard supplementary services are defined as those supplementary services
handled while not in a call. Depending on the supplementary service, several
commands may be available. The command list is defined below:
SX4D GSM 900 • SX4D GSM 1800 24 U SER M ANUAL