TOYOTA 5603 - Manual (Page 28)

28 ‘05-‘09 Tacoma (W/O Hitch) - 3” Kit 5603
8. 6 cyl. models: Power steering reservoir
a. Remove reservoir cap and drain contents into
drain pan.
b. Remove two clamps and power steering lines
from reservoir.
c. Mark power steering lines.
d. Cut power steering lines along cut marks.
e. Drain any remaining fluid from power steering
lines into drain pan.
Power
Steering
Reservoir
Power
Steering
Lines
Clamps
Cut Marks
Power
Steering
Lines
Cut Marks
Front
Front
f. Install kit extension (7/16” OD x 5” L) between
cut power steering lines with two kit clamps (#6
hose). DO NOT TIGHTEN.
g. Install kit extension (5/8” OD x 5” L) between
cut power steering lines with two kit clamps
(#10 hose). DO NOT TIGHTEN.
h. Install power steering reservoir, lines, clamps,
and three bolts onto vehicle.
i. Adjust hoses and tighten all hardware.
Kit Extension
(7/16” OD x 5” L)
Kit Clamps
(#6 Hose)
Kit Extension
(5/8” OD x 5” L)
Kit Clamps
(#10 Hose)
Power
Steering
Reservoir
Bolts
Power
Steering Lines
Clamps