TOYOTA 5603 - Manual (Page 31)

31 ‘05-‘09 Tacoma (W/O Hitch) - 3” Kit 5603
d. Install two pop-up clips to fender wells.
e. Install five pop-up clips to front bumper.
f. Install two pop-up clips, two bolts and grille to
core support.
g. Install wiring harnesses to fog lights, if equipped.
h. Adjust bumper and tighten all hardware.
Fender Well
Front
Bumper
Pop-up
Clip
Pop-up
Clips
Front
Bumper
Screws
Pop-up
Clips
Grille
Wiring
Harness
Fog Light
After Completing Installation
Inside Cab
1. Install airbag fuse and fuse block cover.
Engine Compartment
1. Connect both battery cables. Connect positive cable
first, then negative cable.
Fuse Cover
Fuse Location
May Vary
Airbag Fuse
Negative
Cable (Black)
Positive
Cable (Red)