TOA Electronics C-RM1000 CU - Manual (Page 10)

10
6. NOMENCLATURE AND FUNCTIONS
[ Top Panel ]
TELE WIDE
RIGHT LEFT
UP
DOWN
F4
F3
F2
F1
DVR MON CAM POS
DVR
PLAY / LIVE SEARCH
SCREEN
AUTO SEQUENCE MULTI FULL
SHIFT
MENU
REMOTE CONTROLLER C-RM1000
IRIS FOCUS
PRIORITY
REC
AUTO SEQUENCE MULTI FULL
N
1 2 3
4 5 6
7 8 9
0 C SET
21 22
11 12 13 14 15 16 18
19
17
20
1 2 3 4 5 6 7 8 9 10
ALARM
HOLD
BUZZER STOP
RESET
CAM MENU DVR MENU
(1) LCD Screen
Displays the setting menu and data of operation
status, etc. using characters.
(2) Digital Video Recorder Key [DVR/DVR MENU]
Selects the Digital Video Recorder to be
controlled, and the DVR group number. Holding
down this key for 2 seconds or more displays
the menu of the Digital Video Recorder being
selected. This key lights red when the selected
Digital Video Recorder is in recording mode.
(3) Monitor Key [MON]
Switches the monitor to be operated by the
Remote Controller. The monitor toggles
between Monitor 1 and Monitor 2 each time the
Monitor key is pressed.
(4) Camera Key [CAM/CAM MENU]
Selects the camera number. Selected cameras
can be operated if they are Combination
Cameras. Holding down this key for 2 seconds
or more displays the menu of the Combination
Camera being selected.
(5) Position Key [POS]
Use this key to play back or program the
Combination Camera's preset positions.
(6) Priority Recording Key [PRIORITY REC]
Perform priority recording. This key flashes
during priority recording. Holding down this key
for 2 seconds or more stops priority recording,
causing the key to remain unlit. (Refer to
p. 25 ;
Video Recording.)
(7) Menu/Shift Key [MENU/SHIFT]
Menu
Holding down this key for 2 seconds or more
displays the menu screen on the LCD screen.
(Refer to
p. 36 ; Settings.)
Shift
Use this key when viewing camera images in
multi-segment split screen displays of (19), (20)
and (21) or when selecting the DVR group
number
Password
When passwords are valid, holding down this
key for 2 seconds or more displays the password
entry screen.