TOA Electronics C-RM1000 CU - Manual (Page 15)

15
8.1. Full Screen Display
1. After selecting the Digital Video Recorder, enter the
camera number to be displayed.
2. Press the FULL key.
The designated camera's image is displayed on the
full screen and the FULL key lights. The camera
number is displayed on the LCD screen.
Note
If only the FULL key is pressed, the camera image corresponding to the number shown in the CAM section of
the LCD screen is displayed on the full screen.
FULL FULL
Lights
5 1
1 5
7 1 1
LCD screen
DVR MON CAM POS
DVR MON CAM POS
F U L L
7 1 1 5
LCD screen
Camera number
displayed on the full screen
Monitor output 1
Monitor output 2
Full
Playback mode
Electronic
Zoom
Cascade
output
Live mode
Digital Recorder
menu
Combination Camera
menu
Display position
setting screen
Triplex setting
screen
Search
menu
Archive
menu
Function
Monitor output 1
Monitor output 2
Function
9 Seg 4 Seg 16 Seg* Sequence Full 9 Seg 4 Seg 16 Seg*
* Only the C-DR161 Series (16-channel versions) can display.
8. MONITOR DISPLAY
Functions that can be displayed differ between Monitor outputs 1 and 2.
[Example]
Note
Perform the monitor lock setting for the system using two or more remote controllers .This eliminates the
necessity of operation for switching the monitors and prevents malfunctions. (Refer to
p.50 ; Monitor Lock)