TOA Electronics C-RM1000 CU - Manual (Page 13)

13
7.1.1. Group Selection (cascade connection only)
Notes
• Group settings must be performed in advance. (Refer to
p. 40 ; Group Settings.)
• Screens are not switched during group selection even when an alarm signal is received or the priority
recording button is pressed.
1. Press the Shift key.
2. Press the desired Digital Video Recorder group number.
3. Press the DVR key.
The indication "G_Group No." is displayed in the DVR
section of the LCD screen.
MENU
SHIFT
MENU
SHIFT
G 2 1 1
LCD screen
DVR MON CAM POS
DVR
DVR MENU
2
7. EQUIPMENT SELECTION
7.1. Digital Video Recorder Selection
1. Press the desired Digital Video Recorder number using a
ten-key numerical pad.
2. Press the DVR key.
The selected Digital Video Recorder number is displayed
on the LCD screen. (The key cannot be used if the Digital
Video Recorder is not connected.) For monitors and
cameras, Monitor 1 and Camera 1 are automatically
selected.
7 1 1
DVR MON CAM POS
LCD screen DVR
DVR MENU
7
[Example]
7.2. Monitor Selection
Functions that can be displayed differ depending on the monitor output. (Refer to p. 15 ; Monitor display.)
Press the MON key.
The monitor output alternates between 1 and 2 each time the MON key is pressed, and the monitor number is
displayed on the LCD screen.
MON MON
7 1 1
LCD screen
7 2 1
LCD screen
DVR MON CAM POS DVR MON CAM POS
Note:
Be sure to set Monitor Lock if multiple Remote Controllers are connected in the system. (Refer to
p.50 ;
Monitor Lock.)
[Example]