TOA Electronics C-RM1000 CU - Manual (Page 31)

31
10.7. Triplex Settings
Live images can be assigned to any segment of the screen while recorded images are played back on the
multi-segment split screen. For details, please read the instruction manual enclosed with the Digital Video
Recorder.
1 Hold down the MULTI key for 2 seconds or more while recorded
images are played back on the multi-segment split screen.
The Triplex setting screen is displayed.
Operate the Remote Controller as follows while the Triplex setting
screen is being displayed:
• To move the cursor, tilt the joystick up, down, left or right.
• To view live images, enter the camera number for live display using
the ten-key numerical pad, then press the FULL key.
• To return to recorded image playback, select the live image, then
press the SEQUENCE key.
2. Rotate the joystick counterclockwise or press the C key to exit the
Triplex setting screen.
Note
Reset all live images to recorded images on the Triplex setting screen
in order to switch Triplex mode to playback mode.
MULTI
In multi-screen
display mode