TOA Electronics C-RM1000 CU User Manual

Page 45

Advertising
background image

45

12.4.5. Camera Protocol

Selecting protocol of the Combination Camera connected to the Digital Video Recorder only displays the
abbreviation function that can be used for each protocol. The abbreviation function table is factory-preset to
those for the model of TOA-A.

Note
Multiple combination cameras using different communication methods cannot be connected to a single digital
video recorder. Match the communication methods of all connected cameras.

TOA-A

: Select this model when connecting TOA’s Combination Camera to the Digital Video

Recorder using Type A communications method. (The Digital Video Recorder’s Camera
Protocol: TOA-A)

TOA-B

: Select this model when connecting TOA’s Combination Camera to the Digital Video

Recorder using Type B communications method. (The Digital Video Recorder’s Camera
Protocol: TOA-B)

BOSCH

: Select this model when using BOSCH’s Combination Camera in conjunction with the Digital

Video Recorder.

PELCO-D

: Select this model when using PELCO’s Combination Camera in conjunction with the Digital

Video Recorder.

Some functions or operations are not available depending on the communications method. Determine the
communications method referring to the following table.

Iris key

Position 0 *

1

AUTO key

TOA-A

(Type A)

TOA-B

(Type B)

*

1

Operation for returning the camera to home position. Enter 0, then press the POS key.

*

2

Begins and terminates operations set in the Combination Camera’ s “Auto Function”

settings with each depression of the key. (Refer to

p. 22

; Auto Function Operations.)

*

3

Begins auto pan operation when pressed, and terminates all auto operations when

pressed again during auto pan operation.

*

2

*

3

Note
As shown below, TOA’s Combination Cameras are divided into two groups: one using the Type A (TOA-A)
communications method and the other using the communications method of both Types A and B (selectable
by DIP switch). The communications method is factory-preset to Type A (TOA-A).
For the DIP switch position and settings, refer to the setup manual enclosed with the Combination Camera.

TOA-A (Type A)

: C-CC501, C-CC504, C-CC551, and C-CC554

TOA-A/B (Types A/B selectable)

: C-CC514, C-CC564, C-CC714, and C-CC764

Advertising