TOA Electronics C-RM1000 CU - Manual (Page 55)

55
[Remote Controller connections using the dedicated cable]
13.2.3. Connections between the Remote controller and the Digital video recorder
Termination switch: OFF Termination switch: OFF Termination switch: ON
Remote
Controller
Digital Video
Recorder
RJ-11
terminal
The maximum cable length is 1.2 km (3,937 ft) for distance between the Remote Controller
and the Digital Video Recorder of which termination switch is set to ON.
No AC adapter required
Digital Video
Recorder
Digital Video
Recorder
Power supply
Supplied modular cable (3 m (9.8 ft))
Screwless
terminal
CPEV-S larger than AWG22 (Ø0.65 mm)
RJ-11
terminal
Screwless
terminal
Screwless
terminal
Screwless
terminal
Note: Do not connect the AC adapter.
[C-RF1000 Interface Unit Connections]
The maximum cable length is 1.2 km (3,937 ft) for each distance between the Remote Controller and the
Interface Unit and between the Interface Unit and the farthest Digital Video Recorder.
PC
REMOTE CONTROLLER INPUT
-B
(Screwless terminal)
RS-232C
*2
*1
1
2
3
4
The maximum cable length is 1.2 km (3,937 ft) for each distance between
the Remote Controller and the Interface Unit.
Interface unit
C-RF1000
Remote controller 1
Remote controller 2
Remote controller 3
Remote controller 4
Screwless terminal
Screwless terminal
Screwless terminal
Screwless terminal
Notes
*1. Match the transmission rate of all components connected to the Interface Unit. The Interface Unit's DIP
switch settings must also be identical with the Remote Controller's bit rate settings.
*2. Remote Controller Input Terminal 4 cannot be used simultaneously with the RS-232C port. Connect
either.