Toshiba E-STUDIO900 - Manual (Page 103)

PTM 2-78 B070/B071
2.11.2 INVERTER
Feed-in and Jogging
The inverter feed roller [A] feeds paper to the jogger section. After the trailing edge of
the paper passes through the inverter feed roller, the jogger fences [B] move to square
the paper. This happens every page.
The jogger motor (a stepper motor) [C] moves the jogger fences [B] inward or
outward.
When the main switch is turned on, the jogger motor places the jogger fences at the
home position, which is determined by monitoring the signal from the jogger home
position sensor [D].
When the start key is pressed, the jogger motor positions the jogger fences 15 mm
away from the selected paper size to wait for the paper.
When the paper is delivered to the jogger fences, the jogger fences move inward to
square the paper. After this, the jogger fences move back to the previous position (15
mm away from the paper).
B070D802.WMF
B070D803.WMF
[A]
[C]
[B]
[D]