Toshiba E-STUDIO900 - Manual (Page 105)

PTM 2-80 B070/B071
2.11.3 DUPLEX TRAY FEED MECHANISM
In duplex mode, after the paper leaves the inverter, the duplex inverter gate solenoid
[A] switches the junction gate [B] to direct the paper to the duplex tray. The paper is
fed through the duplex tray by duplex transport rollers 1 [C], 2 [D], 3 [E], and the
duplex feed roller [F].
If duplex mode is not selected, the solenoid does not switch the junction gate, and the
paper goes to the output tray or finisher face down.
B070D806.WMF
[A]
[C]
[B]
[D] [E] [F]