Thales Navigation Mobile Mapper - Manual (Page 108)

102
- On the menu bar, select File>Upload to GPS>Background
Map. If no Map region has been defined previously in the
Map Display area, a message will pop up warning you
that the whole background map is going to be uploaded.
If you click
Yes , the procedure will continue. If you click
No , the procedure will be aborted.
In the next dialog box that opens, you have to select the
destination of the background map. This can be the
MobileMapper receiver (GPS Unit), the local SD Card
reader or the PC hard disk (Hard Drive).
- Check Upload to GPS Unit and click the Next> button. If you
have previously run the procedure described on page 70
to test the communication with the handheld, then a new
dialog box will be displayed reporting successful con-
nection to the handheld. Otherwise, MobileMapper
Office will suggest that you change the settings of the PC
port connected to the handheld.
- After successful connection to the handheld, click the
Next> button again. A new dialog box indicates the size of
the file to be downloaded.
- You just have to click the Finish button to let MobileMap-
per Office complete the upload operation. The following
message is displayed while the file is being uploaded: