Thales Navigation Mobile Mapper - Manual (Page 64)

58
18.NMEA
This option allows you to select the NMEA message that
will be output from MobileMapper. Your choice will
depend on which message is needed by the device con-
nected to MobileMapper:
- V1.5 APA : Autopilot Sentence “A”
- V1.5 XTE : Crosstrack error according to NMEA0183
V1.5
- V2.1 GSA : Standard GPS position message according
to NMEA0183 standard in version 2.1
After selecting the NMEA option from the Setup menu,
use the up/down arrow to highlight the desired choice
and then press ENTER.
19.Baud Rate
This option enables you to set the baud rate of the data
being sent out from the MobileMapper’s output port. The
possible choices are: 1200, 4800, 9600, 19200, 57600 or
115200 baud.
After selecting the
Baud Rate option from the Setup menu,
use the up/down arrow to highlight the desired choice
and then press ENTER.