Thales Navigation Mobile Mapper - Manual (Page 81)

75
Exporting Jobs in GIS Formats
The most important processing of your field data is its export
to a GIS. Exporting field data has two processes: conversion
of the data files to a standard format a GIS can read and then
the actual transfer of the file.
To convert your data into SHP, MIF or DXF:
- On the menu bar, select
File>Open to list the job files in
MobileMapper Office
- Select the file you want to export and click Open . The
content of this file is now displayed on the screen.
- Select File>Export .
- Choose the export format (SHP, MIF, DXF -or MMF, see
opposite) from the Files of type field.
- Select the directory to which the reformatted file will be
transferred. If you don't know where to put this file, just
select a temporary location and click
Export . Your job
will be automatically formatted and transferred to the
selected folder. You can select any folder that is accessi-
ble by your PC - including any GIS folders that may be
on your network. When you start recording data to
export to a GIS, you will typically export data to a GIS
database.
When exporting a job file to SHP format, the following
files are created for each feature type (layer, theme) in
the file:
- featurename.shp
- featurename.dbf
- featurename.shx
When exporting a job file to MIF format, the following
files are created for each feature type (layer, theme) in
the file:
- featurename.mif
- featurename.mid
A single DXF file is created for each existing feature
type when exporting a job to DXF format.
Exporting to DXF
requires that a grid sys-
tem be used in the job
Note that you can also
export a job to the MMF
format. Use this option
when you want to create
a standalone feature
library from the feature
library contained in this
job
Whatever the chosen
export format, all coor-
dinates of feature posi-
tions are exported in
WGS84