Thales Navigation Mobile Mapper - Manual (Page 63)

57
16.Beeper
This option allows you to select which actions will cause
the beeper to sound. You can select one of the following
choices:
- Off (beeper will never sound)
- Keys Only (pressing a key causes a beep)
- Alarms Only (when an alarm is activated)
- Keys & Alarms (beeper will sound when a key is
pressed or an alarm is activated)
After selecting the Beeper option from the Setup menu,
use the up/down arrow to highlight the desired choice
and then press ENTER.
17.Clear Memory
This option allows you to clear one of the following data
sets from MobileMapper’s memory:
- Track history : Will clear the track history displayed on
the Map screen from memory
- Wpts/Routes : Will clear all waypoints and routes from
memory
- Routes : Will clear all routes from memory
- Reset default : Will reset the receiver by restoring all
factory defaults
- All : Will clear all memory
After selecting the Clear Memory option from the Setup
menu, use the up/down arrow to highlight the desired
choice and then press ENTER. MobileMapper will ask
you to confirm your choice. If you have selected
All ,
MobileMapper will then shut off. The next time it is
turned on, it will prompt you that it needs to be initial-
ized.