Thales Navigation Mobile Mapper - Manual (Page 50)

44
The Create Route screen is now displayed. Note that the first
line on this screen is highlighted.
Press ENTER. The Add WPT screen is now displayed. Se-
lect the category of points containing the first waypoint of
the route and press ENTER. Choose a point from the list and
press ENTER. The first waypoint in the route is now defined
and you are now prompted to define the second one. Resume
the instructions in this paragraph for the second point, then
for the third, etc.
When the last point of the route is defined, highlight the
Save
Route field on the Create Route screen and then press EN-
TER to save the route.
2. Creating a Multi-leg Route from the Track History
Press NAV to display a navigation screen, press MENU,
scroll down to
Routes and press ENTER.
Regardless of which route is highlighted in the route list,
press MENU again and highlight the
Save Trk to Rte option.
Press ENTER. MobileMapper then takes you back to the
Route List screen on which you can see that the track history
has been saved as the last route in the list. This route uses a
naming convention of “T01P01 to T01Pxx” where Pxx indi-
cates the number of points in the route.
3. Activating/deactivating a Multi-Leg Route
Press NAV to display a navigation screen, press MENU,
scroll down to
Routes and press ENTER.
In the Route List screen now displayed, scroll down the list
and highlight the route you want to activate. Press MENU,
highlight the
Activate Route option and press ENTER. Mo-
bileMapper comes back to the Route List screen where the
activated route now appears in bold characters. Press NAV to
navigate along this route.
To deactivate this route, press MENU, highlight
Routes ,
press ENTER, highlight the activated route (shown in bold
characters), press MENU, highlight
Deactivate Route and
press ENTER. The route is now deactivated.
Create Route screen
Route List screen