TechniSat HD S2X - Manual (Page 11)

In the following cases you should disconnect the receiver from the mains power, and
should consult an expert:
> the mains cable or the mains plug are damaged
> the receiver was exposed to liquid, or liquid has run into the unit
> in case of severe malfunctions
> in case of significant external damage
When not in use
During a storm or when not in use for a long period (e.g. holiday), the unit should be
disconnected from the mains and the antenna cable should be removed.
Before disconnecting the unit from the mains, you should first switch it to standby and then
wait until the time appears in the display and the red LED lights up.
Important notes on operation
The use of so-called “On Screen Displays” (OSD) means that operation of the digital receiver
is simplified, and the number of keys on the remote control unit reduced. All functions are
displayed on screen, and can be controlled by means of a few simple keystrokes. Functions
that are logically connected are combined in a “MENU”. Any function selected will be
indicated in a different colour. The function keys red, yellow, blue and green are indicated by
coloured bars at the bottom of the screen. In the various menus, these coloured bars
represent different functions, which can be implemented by pressing the appropriate
coloured keys (multi-function keys) on the remote control. The function keys are only
activated when a brief description is displayed in the appropriate field.
Key names and terms that appear in the OSD menu are shown in black type in this
operating manual.
Help: If present, help text can be shown and hidden by pressing the blue function key.
Important note on data security
We recommend that you save a backup copy of the data on your DigiCorder before handing
the receiver over to the specialists for maintenance.
Recreating data is not part of the maintenance and repair work. TechniSat will accept no
responsibility for loss of or damage to data during the repair process
11
3