TechniSat HD S2X User Manual
Page 73
>
Use the arrow keys up/down to mark the line Search mode.
>
By pressing the OK key, decide whether you wish to scan only for free-to-air
programmes (Free programmes), or whether you wish to include encrypted
programmes in the search (All programmes).
>
Use the arrow keys up/down to mark the field Start search. Please also note
Points 9.4.5 and 9.4.6 and the on-screen messages.
9.4.3 Transponder scan
You can scan a specific transponder (see Point 11 Technical terms) for Programmes. To do
this, you need to enter the transponder data.
Satellite
In this line you must enter the satellite on which the desired transponder is located.
>
Use the arrow keys up/down to mark the line Satellite.
>
Press the OK to display a table showing the active satellites, selected in accordance
with Points 6.4 and 10.4.
>
Now use the arrow keys up/down to mark the desired satellite.
>
Confirm by pressing OK.
The selected satellite will now be shown in the line Satellite.
Transponder frequency
>
Use the arrow keys up/down to mark the line Transponder frequency.
>
Use the numeric keys to enter the desired frequency in this line
Symbol rate
The symbol rate indicates the volume of data transmitted per second. This figure could be
shown as, for example, 27500 (27500 symbols per second).
>
Use the arrow keys up/down to mark the line Symbol rate.
>
Use the numeric keys to enter the symbol rate.
Polarisation
>
Use the arrow keys up/down to mark the line Polarisation.
>
In this line, use the OK key to enter the polarisation plane (horizontal or vertical), on
which the desired transponder is broadcast. The signal strength and the signal quality
of the transponder selected will be shown graphically at the bottom of the screen.
Search mode
>
Use the arrow keys up/down to mark the line Search mode.
>
By pressing the OK key, decide whether you wish to scan only for free-to-air
programmes (Free programmes), or whether you wish to include encrypted
programmes in the search (All programmes).
>
Using the up/down arrow keys subsequently mark the Search panel and
confirm with OK.
The scan will be started. Please also note Points 9.4.5 and 9.4.6 and the on-screen
messages.
73
9