TechniSat HD S2X - Manual (Page 59)

markers.
> To do this, mark the beginning and the end of the section to be removed with one
mark each as described under Setting a mark.
> Now use the arrow keys up/down to set the marker indicating the beginning of
the section to be copied.
The section to be copied will now be indicated in red on the progress indicator as
well as in the overview of existing markers (1).
> Now press the green function key Menu and use the arrow keys up/down to
mark the line extract section.
> Press OK to display a query window.
> To actually copy the section, use the arrow keys left/right to mark the field OK
and confirm by pressing OK.
The marked section will now be copied to a new recording. Depending on the size of
the section, this may take several minutes.
Splitting a recording
This function allows you where, for instance, two successive programmes were recorded as
a single recording, to split these into two individual recordings. Each recording will be split at
the point indicated by the relevant markers.
Recordings can be split as follows:
> Set a marker at the beginning of the section to be separated, as described under set
marker.
> Now use the arrow keys up/down to mark the marker from which the total
recording is to be split.
> Now press the green function key Menu and use the arrow keys up/down to
mark the line split recording.
> Press OK to display a query window.
This will show information relating to the two recordings to be created by the split.
> To actually split the recording, use the arrow keys left/right to mark the field OK
and confirm by pressing OK.
Renaming a recording
Your PVR extracts information on the name of each programme broadcast from the
broadcast data stream. If a recording includes several programmes, all the names of the
recorded programmes will be noted, and recorded internally.
To rename a recording, proceed as follows:
> Press the green function key Menu and use the arrow keys up/down to mark
the line Rename recording.
> Confirm by pressing OK.
A list with the available titles will be displayed.
> Use the arrow keys up/down to select the title you wish to use, and confirm by
pressing OK.
> A query will be displayed. Use the arrow keys left/right to mark the field OK and
confirm by pressing OK.
59
8