TechniSat HD S2X - Manual (Page 61)

8.3.2.1 Copying
The Copy function will effect a copy of the marked file resp. folder to be stored on the hard
drive, resp. the USB device. The original file resp. the original folder will remain unchanged.
> Use the arrow keys up/down to mark the file resp, the folder you wish to copy on
to the hard drive. resp. on to the USB device.
> Press the blue function key Functions to open a window showing the functions
available.
> Use the arrow keys up/down to mark the line Copy and confirm by pressing OK.
> To copy the marked file resp. the marked folder, now press the yellow function key
Copy.
The marked file resp. the folder will now be copied, and the name will then also
appear in the left-hand resp. right-hand column of the menu.
Marking blocks
To mark several files simultaneously, proceed as follows:
> Press the Press the OK key to go to the selection mode. The marked file will be
indicated by a cross on the left-hand side.
> You can now use the arrow keys up/down to also mark the preceding or the
following files.
> Once you have completed marking the desired files in this manner, press the yellow
function key Copy to copy the marked files on to the hard drive.
Please note that it is not possible to mark blocks of folders, only files!
8.3.2.2 Moving
The Moving function allows you to move or shift the marked file resp. the marked folder from
the source medium (e.g. the USB device) to the target medium (e.g. the hard drive). At the
end of this procedure, the file or folder that has been moved will be present only on the
target medium, and will be deleted from the source medium.
> Use the red function key Set-Top-Box or the green function key USB devices
to go to the source on which the file or folder to be moved is currently stored.
> Use the arrow keys up/down to mark the file or the folder you wish to move.
> Press the blue function key Functions to open a window showing the available
functions.
> Use the arrow keys up/down to mark the line Move and confirm by pressing OK.
> To move the marked file resp. the marked folder, now press the yellow function key
Move.
> To move several files simultaneously, mark these as described in Marking blocks
above.
8.3.2.3 Delete
To delete files resp. folders proceed as follows:
> Use the red function key Set-Top-Box or the green function key USB devices
to switch to the source on which the file or folder to be deleted is located.
61
8