TechniSat HD S2X - Manual (Page 19)

6.2.3 Date/hour
In this menu point decide whether the hour and the date should be automatically read in
from a determined programme after switching on.
> By pressing the OK key another window will open.
> In this window use the up/down arrow keys to select either the entry Automatic
or select the programme from which the hour and the date should be read in and
confirm the selection with OK.
6.2.4 Standby clock
In this line you can decide whether the current time is to be shown in the display while the
receiver is in standby mode.
> In this line, use the arrow keys left/right to set the mode of the standby clock to
on or off.
6.2.5 Remote control code
At this stage you must decide whether your receiver should be allocated to the remote
control option SAT1 or SAT2.
> To do this, press the SAT1 or SAT2 key and the OK key on the remote control
simultaneously in this line.
6.2.6 Quickstart
In this line you switch the quickstart on/off . If quickstart is switched on your appliance will
start more quickly from standby, although the standby will use more current.
> Switch the quickstart on/off by using the left/right arrow keys.
Accepting settings
To store the settings made in this menu to memory, please proceed as follows:
> Press the green function key Accept to store the changes made, and to return to
the menu Settings.
alternatively:
> Press the red function key Back.
A query then appears.
> If you wish to accept the changes, use the arrow keys left/right to click on the
field Yes, and confirm by pressing OK.
You will now return to the previous menu.
> Press the TV/Radio key to return to normal operation. Settings will not be saved.
6.3 Picture settings
To optimise your digital receiver onto you TV set you can undertake further settings in the
Menu Picture Settings.
> Use the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed
19
6