TechniSat HD S2X User Manual

Page 23

Advertising
background image

-

Record a programme and at the same time another programme from the same
reception field
(1 programme in HD format and 1 programme in SD format or
25 programmes in SD format) or show any programme from the hard drive.

-

Simultaneously record two programmes from the same reception band
(15 programme in HD format and 1 programme in SD format or 2 programmes in
SD5format).

-

Simultaneously record two different programmes from the same reception band
(15 programme in HD format and 1 programme in SD format or 2 programmes in SD-
format) and at the same time play a pre-recorded programme.

6.5.4 Setting the switching matrix

The menu lists the four switching criteria for the DiSEqC control. You receiver is pre-
programmed so that ASTRA is received on switch setting A/A and Eutelsat is received on
setting B/A of a multi-switch. If the switching matrix of your receiving installation is set up
differently, or if you are receiving different satellites, you can adjust the settings of your digital
receiver to those of the receiving installation as follows.

>

Use the arrow keys to select a DiSEqC switch position (1-4) to which you wish to
allocate a satellite (e.g. A/B 3 No satellite), and mark this line.

>

Press the OK key.

Example 1: 2 satellites (Twin-LNBs)

A selection table listing various satellites will now be displayed.

>

Use the arrow keys to mark the desired satellite.
Use the up/down arrow keys to move the marker up or down one line at a time,
or use the left/right arrow keys to move the marker backward or forward one
page at a time.
If the desired satellite is not included in the list, please use one of the reserve slots,
marked User 1 to User 13.

>

Confirm by pressing OK.
The marked satellite will now be added to the menu Antenna settings at the
previously marked position

You can now adjust the settings in the menu Antenna settings, in this manner until the
settings in this menu correspond to those of your receiving unit. For any switching criteria
that you do not require, use the setting No satellite.

23

6

Advertising