TechniSat HD S2X - Manual (Page 71)

> Now use the numeric keys to enter the current unit PIN code in the line Unit PIN
(factory setting 0000).
> In the line Enter new PIN use the numeric keys to enter the desired new unit
PIN code.
> Repeat the entry in the line Repeat new PIN.
> When you have completed changing the PIN code in this manner, you will be taken
back automatically to the menu Parental control.
Note!
Ensure that you do not forget the unit PIN code. If this does happen, please consult
your retailer!
9.3.3 Selecting TV channels/programmes
> Press the OK key.
The TV Main Favourites list will be displayed. The programme currently selected is marked
> Press the red function key to open a selection window. Here you have the option of
selecting the desired programme list type. You have the option of selecting the
desired programme list type. You can also select on of the various Favourites lists.
Refer also to Points 6.6.1 and 9.1.2.
> Using the up/down arrow keys select the type of programme list (e.g. favourites lists).
> Confirm by pressing OK.
The option of various Favourites lists was activated under Point 6.6.1, a selection
window showing the various Favourites lists will be displayed.
> Confirm by pressing OK.
The selected programme list will be displayed.
> Now use the arrow keys to mark the channel to which you wish to block access.
> Block the channel by pressing the yellow function key.
The parental control symbol will be displayed next to the programme selected.
> To block several channels simultaneously, mark these as described in 9.1.4 (Marking
blocks) and block access to them by pressing the yellow function key.
> When you have finished configuring the programme list according to your preferences
in this manner, press the Menu key to return to normal operation.
> To reverse the blocking of individual channels, proceed as described above to mark
the appropriate channel, and remove the parental control symbol by pressing the
yellow function key.
9.3.4 Selecting radio channels/programmes
You can use the same method as described in Point 9.3.3 to block access to radio stations.
9.4 Programme search/scan
As mentioned above, your digital receiver is pre-programmed to receive from the ASTRA
19.2° East and EUTELSAT 13.0° East satellites. To receive new programmes, resp. the
programmes of other satellites, there are several options provided to perform a programme
search, or scan.
71
9