Operating the model 3000 with a dpm-700, To enable the model 3000 – Tektronix Grass Valley 3000 User Manual
Page 104
2-68
Section 2 — Startup & Configuration
Operating the Model 3000 With a DPM-700
This feature allows you to return a high tally from a DPM-700
when configured with the Model 3000. To use the DPM Logical
Channel Tally feature, connect the DPM-700 as described in the
Installation and Service manual.
To Enable the Model 3000
1.
From the Map Inputs Menu:
a.
Select
LOG CHANNEL
with the
LOG/PHYS ASSIGN
button.
b. Select
DPM 1 LOG CHAN 1
with the
VIDEO INPUT
soft knob.
c.
Select
DPM 1 LOG CHAN 1
with the
KEY INPUT
soft knob.
d. Select
NONE
with the
CHROMA KEY INPUT
soft knob.
2.
From the DPM Setup Menu:
a.
Choose
DPM 1
with the
DEVICE SELECT
button.
b. Choose
OTHER FIXED
with the
DPM TYPE
button.
3.
From the DPM Map Aux Buses Menu:
a.
Select
DPM 1.
b. Select
2
with the
NUMBER OF CHANNELS
soft knob.
c.
Select
AUX 1
with the
CHANNEL 1
soft knob.