Configuring key setup, Setup on key menu – Tektronix Grass Valley 3000 User Manual
Page 54
Advertising
2-18
Section 2 — Startup & Configuration
Configuring Key Setup
1.
From the Inputs Menu, press
SETUP ON KEY>
to select the
Setup On Key Menu.
2.
Use the
GROUP SELECT
and
CARD SELECT
buttons to select
the appropriate inputs.
3.
Set the setup to either
NO SETUP
or
KEY SETUP
for each of the
four selected inputs.
4.
Repeat steps 2 and 3 until all key inputs have been configured.
5.
Press the
EXIT
button to return to the Inputs Menu.
SETUP ON KEY MENU
1 TO 8
KEY SETUP
KEY SETUP
KEY SETUP
NO SETUP
config / inputs / setup on key
CARD
SELECT
GROUP
SELECT
INPUT
53
INPUT
55
INPUT
54
INPUT
56
NO SETUP
NO SETUP
NO SETUP
KEY SETUP
Card 14
9 TO 16
Advertising