Tektronix Grass Valley 3000 - Manual (Page 81)

2-45
Configuring External Interfaces
NOTE: All aux buses assigned to a DPM must be in consecutive order.
4. For a DPM-700 , set the NUMBER OF CHANNELS and
CHANNEL 1 = soft knobs as appropriate for your installation.
NOTE: Assigning an Aux Bus to a DPM level saves the parameters
under the DPM level, rather than the MISC level for E-MEM
operations.
5. Press the EXIT button to return to the DPM Setup Menu.
Mapping DPM Inputs
Set up the DPM video and key return input numbers as follows:
1. From the DPM Setup Menu, press DPM MAP INPUTS> to bring
up the DPM Map Inputs Menu.
DEVICE 1
DPM MAP INPUTS MENU
CHANNEL
SELECT
DPM
SELECT
CHAN 2
CHAN 1
CHAN 3
CHAN 4
CHAN 5
CHAN 6
CHAN 7
SECONDARY
DEVICE 2
DEVICE 3
DEVICE 4
VIDEO INPUT
= 19
KEY INPUT
= 42
DEVICE 1
(DEVOUS)
CHAN 2
VIDEO INPUT LOGICAL PHYSICAL KEY INPUT
–
29
–
–
–
–
–
–
63
–
–
–
–
–
19 42
config/extern if/dpm setup/dpm map inputs
V5.3