Tektronix Grass Valley 3000 - Manual (Page 43)

2-7
Software Setup
Software Setup
The system parameters to be used at a particular site or in a
specific studio are usually configured immediately following
installation of the equipment. These include defining input
sources, assigning those sources to crosspoints, setting output
levels, and defining external interfaces. These operations are
accessed through the Configuration Menu, an overview of which
may be seen in the menu tree in
Figure 2-1 and Figure 2-2 .
The Configuration Menu
The Configuration Menu is a top-level menu that provides access
to the User Preferences, System Parameters, Inputs, Outputs,
External Interface, and Aux Bus Format submenus.
1. To begin the setup process, press the CONFG button on the
Main Menu subpanel of the Upper Panel to display the
Configuration Menu.
CONFIGURATION MENU
config
SYSTEM
PARAMS >
USER
PREFS > INPUTS > OUTPUTS >
AUX BUS
FORMAT >
EXTERN
I/F >