Tektronix Grass Valley 3000 - Manual (Page 69)

2-33
Configuring External Interfaces
Setting Editor Port Parameters
1. From the External Interface Menu, press EDITOR I/F> to select
the Editor Interface Menu.
2. With the BAUD and PARITY buttons, select the baud rate and
parity parameters for the editor port by incrementing to the
desired settings.
3. Press EXIT to return to the External Interface Menu
EDITOR INTERFACE MENU
config / extern if / editor if
EVEN
NONE
PARITY BAUD
2400
4800
9600
19200
38400
ODD