Sony DPP-EX50 - Manual (Page 102)

102 GB
3
Click “Yes.
The printing job is canceled.
Note
Do not cancel the printing job on process,
which may cause a paper jam.
Printing from other
application software
You can use a commercially-available
application software to print an image
from the DPP-EX50. Select “DPP-EX50”
in the print dialog box and select the
print paper size in the page setup dialog
box. For details in print settings, see
steps 8 and 9 on pages 98 and 99.
On “Borderless” setting in the “Paper
size” section
When using an application other than
the PictureGear Studio, an image might
be printed with borders even if you
select borderless print in the “Paper
size” section of the “Paper/Output” tab
in the “Sony DPP-EX50 Properties”
dialog box.
When you select the borderless print
option, the printing rage information for
borderless print will be supplied to the
application. Some applications,
however, may arrange and print the
image with borders within the specified
range.
If this occurs, do either of the following
to print an image without borders:
• When you can set print range with an
application, set an image to be printed
fully in the print range. For example,
select “Full page photo print” or a
similar option.
• Set a larger value in the “Enlarge/
Reduce” text box in the “Paper/
Output” tab of the “Sony DPP-EX50
Properties” dialog box.
In either case, make sure to display and
check the preview image before
printing.