Sony DPP-EX50 - Manual (Page 19)

19 GB
Printing using a TV monitor (MONITOR OUT mode)
Connecting the AC power cord
After you have made the connections,
connect the AC power cord to the AC
outlet.
The ON/STANDBY indicator lights in
red.
To the wall outlet
AC power cord
Inserting a memory
card
Inserting a “Memory Stick”
To print an image stored on a “Memory
Stick,” insert it into the “Memory Stick”
slot until it clicks into place.
For the varieties of “Memory Stick” that
you can use with the printer, see page
127.
Access
indicator
flashes while
the printer is
on.
Insert it so
that the b
mark
is on the
upper left
corner.
To eject a “Memory Stick”
Push the “Memory Stick” lightly into
the insertion slot. After the “Memory
Stick” pops back out, remove it slowly.
Notes
• When using a “Memory Stick Duo,” be
sure to use the Memory Stick Duo adaptor.
• Do not attempt to insert a “Memory Stick”
forcibly into or out of the slot. If you do so,
the “Memory Stick” or the printer may be
damaged.
Note
The AC power cord in the above illustration
is for 120 V AC only. The plug shape of the
AC power cord for 100 to 240 V is different.