Sony DPP-EX50 - Manual (Page 37)

37 GB
Printing using a TV monitor (MONITOR OUT mode)
3
Select a font.
The characters are input in the font
displayed in the “FONT” button.
To select a different font, do the
following:
1 Press the arrow ( B/b/V/v)
button to select “FONT.”
2 Press ENTER repeatedly until
the desired font is displayed:
Note
You cannot specify multiple fonts and
colors for a sequence of characters input.
All the lines of characters are input in
the identical font and color. You can
change font and color in the middle of
input procedures; The changed font and
color will be applied to all the input
characters.
4
Select a color.
The characters are input in the color
displayed next to “COLOR”. To
apply different color, do the
following:
1 Press the arrow ( B/b/V/v)
button to select “COLOR” and
press ENTER.
The color selection window is
displayed.
2 Press the arrow ( B/b/V/v)
button to select the desired color
and press ENTER.
Note
You cannot apply multiple colors for
each line of characters.
5
Press the arrow (B/b/V/v)
button to select the desired
character, then press ENTER to
input a character.
The selected characters are input in
the character input box. You can
enter up to 50 characters for each
single line.
To change lines
Press the arrow ( B/b/V/v) button
to select # and press ENTER.
You can enter the maximum of 5
lines.
To input a capital letter
Press the arrow ( B/b/V/v) button
to select “CAPS” and press ENTER.
The capital letters keyboard is
displayed. To return to the small
letters input keyboard, select
“CAPS” again.
To correct characters in the
input box
•To delete a character before the
cursor ( | ) in the input box
Press the arrow ( B/b/V/v) button to
select “BS” (Back Space) and press
ENTER. Each time you press ENTER,
a character before the cursor is
deleted.
Continued