Sony DPP-EX50 - Manual (Page 105)

105 GB
Troubleshooting
Symptom
“DEMO” is
displayed on the
TV monitor.
Some images in
the image list are
not displayed or
not printed even
if they are
displayed.
Check
• Did you press INPUT
SELECT when no
memory card is
inserted?
• Are thumbnail images
displayed in the image
list?
• Does the mark displayed
below appear in the
image list?
• Was the image created
on your PC?
• Does the mark displayed
below appear in the
image list?
Cause/Solutions
c The images contained in the printer are
displayed (demonstration mode). You can
print these images or use them to create a
print.
To exit the demonstration mode, display the
image list of the printer’s built-in image,
and then press INPUT SELECT again.
c If the image is displayed but cannot be
printed, the file used for printing is
damaged.
c If there are no images stored in the
“Memory Stick” or CompactFlash card, the
no file message appears.
c If an image is not compatible with DCF
(Design rule for Camera File system), it may
not be printed with the printer even if it is
displayed on the PC monitor.
c If the mark shown on the left is displayed,
the image may be a JPEG file created with
your computer, or the thumbnail data is not
contained.
Select the mark and press PICTURE. If a
preview image is displayed, you can print
the image. If the same mark is displayed
again, the image is of incompatible file
format and you cannot print it with the
printer.
c If the mark shown on the left is displayed,
the image is of compatible file format but its
thumbnail data or the data itself cannot be
opened.
Select the mark and press PICTURE. If a
preview image is displayed, you can print
the image. If the same mark is displayed
again, you cannot print it with the printer.