Sony DPP-EX50 - Manual (Page 119)

119 GB
Troubleshooting
Symptom
Colors are not
reproduced
correctly.
Preview image does
not reflect the print
settings in the
“Graphics” tab of
the “Sony DPP-
EX50 Properties”
dialog box.
Print quantity
specified in the
“Paper/Output”
tab of the “Sony
DPP-EX50
Properties” dialog
box does not take
effect.
Check
• Is “Exif Print” checked
in the “Graphics” tab
of the “Sony DPP-
EX50 Properties”
dialog box?
• Is “ICM” selected in
the “Graphics” tab of
the “Sony DPP-EX50
Properties” dialog box?
• Are you using
PictureGear Studio?
Cause/Solutions
c The Exif Print setting in the “Color
reproduction/Picture quality” section
supports the PictureGear Studio only. To
print from other application, uncheck “Exif
Print”.
c The ICM setting may be valid only when
you are using an ICM-compliant
application. Check to see if the application
software you are using supports ICM.
c The print settings adjusts the printer itself
and cannot influence the preview image.
c Set the print quantity in the “Print” dialog
box of the PictureGear Studio. The print
quantity setting in the “Paper/Output”
tab of the printer driver does not take
effect.
c Depending on the application you use, the
print quantity setting of the application you
use may have priority over the setting
specified in the printer driver dialog box.