Texas Instruments TMS320F2802 - Manual (Page 80)

SYSRS
SYSCLKOUT
Control
I2CINT1A
I2CINT2A
C28x CPU
GPIO
MUX
Peripheral Bus
I2C-A
System Control Block
I2CAENCLK
PIE
Block
SDAA
SCLA
Data[16]
Data[16]
Addr[16]
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, TMS320C2802
TMS320C2801, TMS320F28016, TMS320F28015
SPRS230N – OCTOBER 2003 – REVISED MAY 2012 www.ti.com
A. The I2C registers are accessed at the SYSCLKOUT rate. The internal timing and signal waveforms of the I2C port are
also at the SYSCLKOUT rate.
B. The clock enable bit (I2CAENCLK) in the PCLKCRO register turns off the clock to the I2C port for low power
operation. Upon reset, I2CAENCLK is clear, which indicates the peripheral internal clocks are off.
Figure 4-15. I2C Peripheral Module Interfaces
The registers in Table 4-14 configure and control the I2C port operation.
Table 4-14. I2C-A Registers
NAME ADDRESS DESCRIPTION
I2COAR 0x7900 I2C own address register
I2CIER 0x7901 I2C interrupt enable register
I2CSTR 0x7902 I2C status register
I2CCLKL 0x7903 I2C clock low-time divider register
I2CCLKH 0x7904 I2C clock high-time divider register
I2CCNT 0x7905 I2C data count register
I2CDRR 0x7906 I2C data receive register
I2CSAR 0x7907 I2C slave address register
I2CDXR 0x7908 I2C data transmit register
I2CMDR 0x7909 I2C mode register
I2CISRC 0x790A I2C interrupt source register
I2CPSC 0x790C I2C prescaler register
I2CFFTX 0x7920 I2C FIFO transmit register
I2CFFRX 0x7921 I2C FIFO receive register
I2CRSR - I2C receive shift register (not accessible to the CPU)
I2CXSR - I2C transmit shift register (not accessible to the CPU)
80 Peripherals Copyright © 2003–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802
TMS320C2801 TMS320F28016 TMS320F28015