For your protection please read these safety
instructions completely before you connect the
equipment to the power source. Carefully observe
all warnings, precautions and instructions
both on the apparatus and in these operating
instructions.
Retain this manual for future reference.

Water and Moisture

Do not operate the apparatus under or near

•

water—for example near a bathtub, kitchen
sink, or laundry tub, in a wet basement, near
a swimming pool or in other areas with high
humidity.
Never install jacks for communication cables

•

in wet locations unless the jack is specifically
designed for wet locations.
Do not touch the product with wet hands.

•

Cleaning

Unplug the apparatus from communication

•

lines, mains power-outlet or any power source
before cleaning or polishing.
Do not use liquid cleaners or aerosol cleaners.

•

Use a lint-free cloth lightly moistened

•

with water for cleaning the exterior of the
apparatus.

Ventilation

Do not block any of the ventilation openings

•

of the apparatus. Never cover the slots and
openings with a cloth or other material.
Never install the apparatus near heat sources

•

such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Do not place the product in direct sunlight or

•

close to a surface directly heated by the sun.

Lightning

Never use this apparatus, or connect/

•

disconnect communication cables or power
cables during lightning storms.

Dust

Do not operate the apparatus in areas with

•

high concentration of dust.

Vibration

Do not operate the apparatus in areas with

•

vibration or place it on an unstable surface.

Power Connection and Hazardous
Voltage

The product may have hazardous voltage

•

inside. Never attempt to open this product,
or any peripherals connected to the product,
where this action requires a tool.
This product should always be powered from

•

an earthed power outlet.
Never connect attached power supply cord to

•

other products.

In case any parts of the product have visual
damage never attempt to connect mains power,
or any other power source, before consulting
service personnel.

The plug connecting the power cord to the

•

product/power supply serves as the main
disconnect device for this equipment. The
power cord must always be easily accessible.
Route the power cord so as to avoid it being

•

walked on or pinched by items placed upon or
against it. Pay particular attention to the plugs,
receptacles and the point where the cord exits
from the apparatus.
Do not tug the power cord.

•

If the provided plug does not fit into your

•

outlet, consult an electrician.
Never install cables, or any peripherals,

•

without first unplugging the device from it’s
power source.

Servicing

Do not attempt to service the apparatus

•

yourself as opening or removing covers may
expose you to dangerous voltages or other
hazards, and will void the warranty. Refer all
servicing to qualified service personnel.
Unplug the apparatus from its power source

•

and refer servicing to qualified personnel
under the following conditions:

If the power cord or plug is damaged or

•

frayed.
If liquid has been spilled into the apparatus.

•

If objects have fallen into the apparatus.

•

If the apparatus has been exposed to rain or

•

moisture.
If the apparatus has been subjected to

•

excessive shock by being dropped.
If the cabinet has been damaged.

•

If the apparatus seems to be overheated.

•

If the apparatus emits smoke or abnormal

•

odor.
If the apparatus fails to operate in

•

accordance with the operating instructions.

Accessories

Use only accessories specified by the

•

manufacturer, or sold with the apparatus.

Communication Lines

Do not use communication equipment to

•

report a gas leak in the vicinity of the leak.

Advertising

Popular Brands

Popular manuals