TANDBERG 1D13898.07 - Manual (Page 65)

65
D13898.07
NOVEMBER 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Live Unicast Streaming Settings
Configuring Windows Media Streaming Server
Live settings
User Name.
Enter the
user name to be used for
authentication with your
streaming server.
Password. Enter the
password to be used for
authentication with your
streaming server.
Password Confirm. Enter the
password again to confirm.
Server push. Select this option if you want to
push your live stream to an external Windows
Media streaming server.
Port. Enter the port to be used with an external
Windows Media streaming server. The default
port if you are using the Content Server’s
Windows Media streaming server is 8080.
Network pull port(s). Select
this option if you want the
external server to request the
stream. A network publishing
point must be created on
the external Windows Media
streaming server to use this
functionality. Enter the ports
for network pull of
Main and
Dual video streams—select
ports that are NOT being
used by the Content Server
(see the Appendix for a list
of ports used by the Content
Server).
Live URLs
Use default live URLs.
Choose this option to
use the default live URL for this media server.
Use alternate live URLs . Choose this option to
supply your own URLs for live streaming. Enter
the URLs for Main and Dual video streams and
choose whether you wish the filename (in this
case the publishing point name) to be appended
to the alternate URL.
Publishing Points
Create new.
Choose this option if you want the
Content Server to create new publishing points
on your external streaming server.
Create new using settings from existing. Choose
this option if you want the Content Server to create
new publishing points on your external streaming
server, using the settings from existing publishing
points. Enter the existing
Publishing Points for your
Main and Dual video streams (they can be the
same in both fields).
Use existing. Choose this option if you have
already set up publishing points on your external
streaming server. Enter the existing
Publishing
Points for your Main and Dual video streams.
There must be two different publishing points to
stream one video stream off each.