Toshiba B-SX600 SERIES - Manual (Page 106)

14. SPECIFICATIONS
14- 4
14.3 Cutter Unit
Item Specifications
Acceptable media thickness 0.08 mm to 0.26 mm
Acceptable label pitch 10 mm to 1,000 mm
Cut mode Continuous cut
Cut after printing
Batch cut
Restrictions • Cutting self-adhesive labels is not allowed.
•
Cutting within 1 mm around perforation is not
allowed.
• Cutting fabrics or films is not allowed.
∗ The Cutter Unit is a factory option.
14.4 Peel-off Unit
Item Specifications
Effective print speed 101.6 mm/second or less (same as a feed speed)
Peeling method Tensioning
Peeling detection system A reflective photo sensor is used to detect a label.
Restrictions Peel-off operation is not allowed when:
• Perforated labels are used
• Fanfold labels are used.
• Fabrics or films are used
• Outside wound labels are used
• Labels other than rectangular die-cut labels are
used.
∗ The Peel-off Unit is a factory option.