Toshiba B-SX600 SERIES - Manual (Page 73)

8. OPERATION PANEL
8- 9
2. Clear Trip Meter menu
TRIP (or the running distance) can be cleared.
3. Test print menu
A print test pattern is printed out.
“TTP” must be selected when using thermal transfer paper to perform a print test.
On the other hand, “DTP” must be selected when using thermal paper to perform a print test.
(“TTP” is selected as default.)
4. Reprint Error Page menu
In the case that an error occurs while printing, whether to reprint an erroneous or not is specified.
(1) If ［Yes］ is selected for [Reprint Error Page] in the Menu of the printer, printing will be
restarted from the erroneous page.
(2) If ［No］ is selected, printing will be restarted from the page subsequent to the erroneous
page.
(“Yes” is selected in the as default.)
* Depending on print data or format, an erroneous page may look like it has been printed
completely. Select “No” if any duplications are not allowed.
5. TOF After Booting
Whether a higher priority should be given to print position accuracy or media saving in the page
alignment is specified. Please refer to section 7.3 Page Alignment for detail.
(“Precise print mode” is selected as default.)