Toshiba B-SX600 SERIES - Manual (Page 53)

6. PRINTING FROM YOUR COMPUTER
6- 5
If LPR is selected for print protocol, open the “B-SX600-HS11-QM-R Printing Preferences” dialog
box, click the [Device Settings] tab, and remove the check from the “Obtain printer information”
checkbox.
If printing is performed with LPR selected for print protocol and the “Obtain printer information”
checkbox checked, subsequent printing may fail.
The printer (with a LAN interface) must be on the same network segment as the computer on which
such utilities as Quick Setup and Printserver Version Up Tool (for the model with a LAN interface)
run.
If the computer and the printer (with a LAN interface) are not on the same network segment, a
problem will occur. For instance, the configuration of the printer (with a LAN interface) cannot be
set up from the Quick Setup or Printserver Version Up Tool utility.
Ensure that the printer (with a LAN interface) and the computer are connected on the same network
segment before using these utilities.