Toshiba B-SX600 SERIES - Manual (Page 30)

3. MEDIA AND RIBBON
3- 4
3.4 Label with black marks
“Label with black marks” refers to a label stock with black marks printed at the back of the
backing paper for the position detection purpose, as illustrated below. When a label stock with
black marks is loaded, the Reflective Media Sensor is used.
Label pitch
10 to 1,000 mm
Page start line
12 mm or over
Reflective Media Sensor
(Located under the media)
Media feed direction
2 to 13 mm
Black mark on the
reverse side
15 to 120 mm