Printer setup, 1 removing the protective materials, Caution – Toshiba B-SX600 SERIES User Manual
Page 20
Advertising
2- 1
2. PRINTER SETUP
2.1 Removing the Protective Materials
Please be careful not to get your fingers caught in the covers while opening
or closing them. This may cause injuries.
Precautions
•
Do not plug in the Power Cord until the printer is set up completely.
1. Hold the Side Cover Grip and open the Side Cover completely.
2. Push up the Upper Unit Unlock Lever (underneath the Upper Unit Handle) to unlock the Upper
Unit.
3. Hold and lift the Upper Unit Handle until it is locked.
Upper Unit Unlock Lever
Upper Unit Handle
CAUTION
Side Cover Grip
Advertising
This manual is related to the following products: