TANDBERG D12155-10 - Manual (Page 14)

14
TANDBERG Videoconferencing System Installation
I MPORTANT
T HE CAMERA SHOULD BE ALIGNED WITH THE FRONT EDGE OF THE MONITOR TO ENSURE THAT THE IR- SENSOR IN THE CAMERA CAN PICK UP
SIGNALS FROM THE REMOTE CONTROL .
• Place the monitor on top of the cabinet/top plate and ensure it is stable.
• You may fasten the monitor to the cabinet using the securing kit.
• Take the camera and remove the plastic backing from the double sided tape-pads on the base of the unit. Place
the camera centrally, on top of the monitor close to the front. If the system has two monitors, place the camera
on the left monitor (where menus and incoming picture will be displayed).
NOTE