TANDBERG D12155-10 - Manual (Page 33)

TANDBERG Videoconferencing System
33
General use
Voice Activated Camera Positioning
Through Voice Activated Camera Positioning and the use of two microphones, the camera will automatically view
the current speaker.
Setup
Before using camera tracking, the camera positions used must be stored at presets P7 (Mic1) and P8 (Mic2).
E XAMPLE : T HE CAMERA POSITION STORED AT P7 MUST BE RELATED TO M IC 1, THEREFORE ALL PARTICIPANTS WHO ARE LOCATED CLOSEST TO M IC 1
SHOULD BE INCLUDED IN THE P7 CAMERA POSITION ETC . W HEN CAMERA TRACKING IS ACTIVATED AND A PERSON CLOSE TO M IC 1 SPEAKS , P7 WILL BE
AUTOMATICALLY SELECTED
.
Activating
Enable Camera Tracking by pressing ‘CamTrack On’ in the ‘Preset 0-9’ menu, which is activated by
pressing the P button on the remote control. An on-screen indicator ‘CamTrackOn’ will appear.
When activating another video source (e.g., document camera), camera tracking will be temporarily
disabled until you re-select MainCam or a MainCam preset.
Pressing M
IC
O
FF
will temporarily disable camera tracking.
A Voice Detector makes the system more tolerant of noise and ensures the camera not to be moved by
noise such as paper shuffling, etc.
Deactivating
Disable Camera Tracking by:
• moving the camera manually.
• activating a MainCam preset when MainCam is already activated.
• disconnecting the call.
An on-screen indicator ‘CamTrackOff’ will appear.
T HE CAMERA TRACKING SPEEDS MAY BE ALTERED IN THE ‘V IDEO S ETTINGS ’ MENU . S EE ‘A DVANCED USE ’ FOR FURTHER DETAILS .
P
presets
mic off
TIP