TANDBERG D12155-10 - Manual (Page 39)

TANDBERG Videoconferencing System
39
General use
MultiSite (MCU)*
The system has a built-in multipoint conference unit (MCU), MultiSite, which has the capability to establish
meetings with up to 4 video sites (5 if at least one site is a telephone call, ISDN/analogue/mobile).
The video calls in a conference must be connected using the same bandwidth.
A conference can consist of any combination of ISDN/
LAN sites.
It is possible to have telephone meetings with up to 5
participants.
The MultiSite supports both Voice Switched and
Continuous Presence mode (see ‘MCU Services’ in
‘Advanced use’ for description of these modes).
Establishing a conference is done by first making a call
to one site. When a call is established with the first site,
the other sites are connected one by one.
It is possible to either dial out to the sites or the sites
can dial in to the MultiSite.
* - Optional feature.
S EE ‘U TILITIES ’, ‘C ONTINUOUS P RESENCE ’ TO CHANGE MODE . TIP
Both ISDN, IP and mixed ISDN/IP conferences can be
encrypted if all systems supports encryption.
For encrypted calls, there is also a maximum bandwidth of 768 Kbps for the whole conference. This means that a
3 site conference will have a maximum bandwidth of 384Kbps per connection, while a 4 site conference will have a
maximum bandwidth of 256 Kbps per connection.
T HE SYSTEM SUPPORTS MIXED M ULTI S ITE WITH V.35 AND IP, BUT THE IP SITE MUST BE ADDED AFTER THE V.35 IS UP AND RUNNING . NOTE
M ULTI S ITE - W HICH QUALITY CAN BE USED ON EACH SITE ?
N O OF SITES
B
ANDWIDTH
4
SITES
3
SITES
768 KBPS 256 384
1152 KBPS 384 512
1536 KBPS 512 768
NOTE - 4 SITES INDICATES YOURSELF + THREE OTHER SITES .