TANDBERG D12155-10 - Manual (Page 48)

48
TANDBERG Videoconferencing System Advanced use
Advanced call quality
* - Requires option ‘Presenter’. To check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’.
** - E2 Only
NOTE
T HE ‘A UTO ’ SETTINGS ARE RECOMMENDED
CHOICES FOR MOST CASES . T HE OTHER AUDIO ,
VIDEO AND RESOLUTION SELECTIONS MADE IN THIS
MENU WILL OVERRIDE THE SELECTIONS MADE IN THE
‘C ALL Q UALITY ’ MENU AND ARE NOT
RECOMMENDED TO BE CHANGED FOR NORMAL USE .
Audio
Auto
The setting of ‘Audio: Auto/High/Normal’ in ‘Call Quality’ will be used.
G.722.1 Compressed high quality audio (7 kHz).
G.722 High quality audio (7 kHz).
G.728 Compressed normal quality audio (telephone quality, 3.1 kHz).
G.711 Normal quality audio (telephone quality, 3.1 kHz).
Off No audio is transmitted.
Video
Auto
Optimized video quality depending on available bandwidth.
H.264** Bandwidth efficient video compression and decompression.
H.263 Normal video compression and decompression.
H.261 Legacy video compression and decompression.
Off No video is transmitted.
Resolution
Auto
The setting of ‘Video: Auto/Motion/Sharpness’ in ‘Call Quality’ will be used, see tip above.
4CIF * Digital Clarity (704 x 576 pixels), only for H263.
CIF High resolution video (352 x 288 pixels).
QCIF Low resolution video (176 x 144 pixels).
H.331
Off
Standard two-way communication with quality negotiation between both sides.
On Used when broadcasting a video conference from one site to many others, e.g. via satellite,
where there is no possibility to negotiate quality between the receivers and the originator due to
one-way communication.
Status Format
Provides call quality feedback on the status line.
Auto
Video off/on, Audio off/normal/high
Advanced Shows video/audio standards (Example: Video: H261 CIF, Audio: G722).
R ESOLUTION , A UTO FUNCTIONALITY
( IF SUPPORTED BY FAR END ):
W HEN ‘V IDEO : M OTION ’ :
L OW BANDWIDTHS : CIF, SIF
H IGH BANDWIDTHS : I CIF, I SIF
W HEN ‘V IDEO : S HARPNESS ’ :
4CIF, 4SIF, VGA, SVGA, XGA**
TIP